Trench drains and concrete channels
Trench drain channels set to line and grade, encased in concrete and finished flush with the slab around them.
Open 24 hours, 7 days a week · Mississauga and the GTA
What is included
- Saw cutting and removal of existing concrete or asphalt
- Excavation of the trench
- Channel sections and grates set to line and grade
- Concrete encasement to the detail from the manufacturer
- Dowels or reinforcement into the adjoining slab, as specified
- Slab falls shaped toward the drain
- Formed concrete swales and channels
Why the details matter
A trench drain works only if the channel is straight, at the right height, and fully supported. Set too high, water goes around it. Poorly supported, the grates rock and the concrete edges break under wheels. We set every section to grade, brace it so it cannot float or shift during the pour, and encase it the way the manufacturer requires.
The load class of the channel and grate, from foot traffic to heavy trucks, is chosen by your engineer or designer. We install the system that is specified.
Where they go
- Garage and parking entrances
- Loading docks and service bays
- Bus garages and transit sites
- Plaza entrances and walkways
- Wash bays and pool decks
On working sites
We install in stages, in sequence with the slab pours around the drain, so part of the area stays in use. The length of the run, the load class, and how much existing slab has to be cut out are what drive the price.
How a trench drain sits in the slab
The channel has to be straight, on grade and fully supported before the slab is poured around it.
- GrateSet just below the slab surface, so water gets in.
- ChannelSet straight and to grade, and braced so it cannot float during the pour.
- Concrete encasementFull support under and beside the channel, to the detail from the manufacturer.
- DowelsTie the encasement to the slab, as specified.
- Slab fallsThe surface slopes toward the drain from both sides.
Thickness, concrete strength, joint spacing and slopes follow your project's drawings and specifications.
Photos from recent jobs
Trench Drains & Channels work we have completed.
Questions about trench drains and channels
Short answers. Your quote covers the details for your site.
Who supplies the trench drain?
Either of us. We install the system named in your drawings, or supply it as part of the quote.
Who connects the drain to the storm sewer?
A licensed plumber or drain contractor makes the connection. We coordinate the timing with them.
Can you add a drain to an existing slab?
Yes. We saw cut a trench, set the channel, and pour the concrete back flush with the existing surface.
Where we do this work
We are based in Mississauga and work across the Greater Toronto Area. Pick your town for local details.
Related services
Often done on the same visit.
- Slabs & Pads→Shed and equipment pads, loading zones, bus lanes and heavy-duty paving, placed and finished in stages.
- Saw Cutting & Joint Sealing→Control joints cut on time, expansion joints placed and joints sealed, so cracks stay where they belong.
- Curbs & Gutters→Curb and gutter formed and poured to municipal and project specifications, including OPSD details.
- Forming, Placing & Finishing→Formwork set to line and grade, concrete placed, and broom, hand-trowel or power-trowel finishes.
Request a quote
Tell us about the job and we will get back to you with a written quote. The service is already selected for you.